Resetting Your Holosun EPS Carry Red Dot

Sometimes your Holosun EPS Carry Red Dot might need a clean slate. This could be due to unexpected behavior or if you simply want to return it to its factory settings. Don't worry, resetting your red dot is a straightforward process.

• To initiate the reset, locate the tiny button on the bottom of your Holosun EPS Carry.
• Using a small tool like a pen or paperclip to this button will activate the reset sequence.
• Keep the button held down for approximately 5 seconds until you see the display change. This indicates that the reset is complete.

Once the reset is finished, your Holosun EPS Carry Red Dot will be back to its default settings. You'll need to re-adjust your zero and set your preferred brightness and reticle type.

Adjusting Your Holosun EPS Carry to Default Settings

When your Holosun EPS Carry begins acting up or you simply want a fresh start, resetting it back to its default settings can be a helpful solution.

To perform this reset, first accessing the control menu on your sight. Identify the "Reset" or "Factory Reset" option within the menu and select it using the buttons. Your Holosun EPS Carry will then reboot, returning all settings to their original state.

After the reset, you can adjust your Holosun EPS Carry's features according to your individual preferences and shooting needs.

Factory Reinitialize Procedure for Holosun EPS Carry Red Dot

To execute a factory reset on your Holosun EPS Carry Red Dot, you'll need to employ the built-in function. First, ensure that the red dot sight is powered switched up. Next, find the reset button on the rear of the device. It's usually a small button.

Using a pointed object like a pen tip, push down and maintain the reset button for approximately 5 seconds. You should see a brief blinking of the LED indicator to confirm that the reset process has begun. Stop pressing the reset button after the light indicates. Your Holosun EPS Carry Red Dot is now reset to its factory settings.

Restore Your Holosun EPS Carry Back to Life: A Factory Reset

Is your Holosun EPS Carry struggling to function? A factory reset could fix the issue. This process will return your sight to its original settings, maybe eliminating software glitches.

Before you begin, remember to record any preferences you have made. You'll need to access the reset function on your sight. Consult your owner's manual for specific steps.

Once in the reset area, select "Factory Reset" and validate your choice. Your sight will now reboot. Upon completion, your Holosun EPS Carry should be back to its best, ready for reliable performance.

Return Your Holosun EPS Carry to Factory Settings

Need to start fresh your Holosun EPS Carry? It's a breeze! First, find the small button on the side of the sight. Then, use a paperclip to press and maintain this button for about ten seconds. You'll see a change in the display, indicating that the reset process has begun. Release the button and your EPS Carry will power cycle. Now it's back to its factory settings, ready for a new owner's!

• Remember that resetting your sight will erase any custom settings you made.

Reinitialize Your Holosun EPS Carry: A Factory Default Guide

Need to start fresh with your Holosun EPS Carry? A factory reset cleanses your settings back to their default state. This can be useful if you're experiencing issues, want to gift your sight, or simply prefer a clean slate. Let's the steps to perform a factory reset on your Holosun EPS Carry:

• Initially turning on your Holosun EPS Carry.
• Next, press and hold both the mode button and theelevation button simultaneously.
• Maintain the buttons pressed for approximately 5 seconds until you see a message on the display.
• You'll indicate that the device has been reset to factory settings.
• Once complete, release the buttons and your Holosun EPS Carry will power down.